Post
by RB » December 3rd, 2004, 10:17 am
THaus, make sure the logs are kiln dried. D logs should have a channel on top and bottom for a masonite spline that goes between the logs. I would also use Oly log screws and not spikes, they are faster and cause less splitting. Our logs are pine and the house is 2k sq ft. We live, and hunt, there full time about 60 mi. west of St. Louis. Are you going to have open log walls or stud with knotty pine tougne covering. We have insulated stud walls inside with the pine. Good luck with it.